120m 1080p Transmitter or Receiver over IP TCP HDMI Extender Ethernet over Lan signal RJ45 cat5 cat6 cat5e HDMI Extender TX / RX

120m 1080p Transmitter or Receiver over IP TCP HDMI Extender Ethernet over Lan signal RJ45 cat5 cat6 cat5e HDMI Extender TX / RX
  • Продавецwww.flimmer.com
  • Список ценUS $49.99piece
  • Продажная ценаUS $49.99piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,5 (210)

Oписание продукта

aeProduct.getSubject()

10PCS High quality hdmi extender 100m HDBaseT HDMI Extender 100m over Ethernet 3D & POE with IR control

 

aeProduct.getSubject()

The HDMI extender over 1 coaxial cable with IR control is the right way to send your HDMI signal over long distances. Instead of using expensive HDMI cables, this device lets you use your existing coaxial cables/sockets while also performing the same functions like transferring Deep Color (12 bits/color) video, all with a bandwidth up to 225MHz. And if that weren’t enough, you can use your existing remote to control your device through an IR blaster.

aeProduct.getSubject()

HDMI Transmitter ports     1 x HDMI,1x IR Tx, 1xBNC

HDMI Receiver ports       1 x HDMI,1x IR Rx, 1xBNC

Power Supply        2x 5V1A DC   

ESD Protection Human body model        ±8kV (air-gap discharge) ,

±4kV (contact discharge) (hdmi extender ir)

Dimension                80mm x 41mm x 25 mm

Weight             150g

Operating Temperature              0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature                 -20°C ~ 60°C / -4°F ~ 140°F

Relative Humidity           20 ~ 90% RH (Non-condensing)

 

1. Compliant with HDMI 1.3, HDCP 1.1 standards.

2. Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/color) and 48KHz LPCM Digital audio.

3. Equalizes and recovers incoming TMDS data before re-transmitting it in high quality, regardless of the incoming signal quality.

4. Super IR control system, IR transport channel can be forward or backward.

 

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

 

aeProduct.getSubject()

1. HDMI Transmitter      1Pcs

2. HDMI Receiver        1Pcs

3. IR Tx cable    1Pcs

4. IR Rx cable    1Pcs

5. 5V1A DC Power Supply Adaptor (2 Pcs)

6. Product Manual

 

 Connect and Operate

Connect the signal source such as Blu-Ray Player, Play Station 3, audio/video receiver, cable or satellite receivers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Transmitter input. HDMI cable length should not exceed 16 ft.

Connect the HDMI Transmitter output BNC ports using single RG6 coaxial cables to included Receiver. It is strongly recommended that factory terminated cable assemblies be used and their length shall not exceed 328 ft respectively.

Connect the HDMI output from the Receiver to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection. HDMI cable length should not exceed 16 ft.

The source can be controlled from the display. This is accomplished by using an optional IR Receiver pigtail pointing away from the display, which can be connected to the receiver portion of the extender. The IR Transmitter pigtail is then connected to the Transmitter of the extender and pointed at the source.

 

Application Example

aeProduct.getSubject()

 

We promise you high quality products, with very bueatiful packet, On the receipt, we can write low price  to avoid any tax from any country.

We suppport dropshipping, gift group purchasement ,wholesale and retail, for more of information , please check official website .More surprise pls check our web:www.icablelink.com .And if you are wholesale importer or drop shipping , please contact us by email or leave us message

 Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Thank you!

aeProduct.getSubject()

 

aeProduct.getSubject()