Multi Functional Audio/Video Switch Extractor with 8 Inputs to 1 HDMI Output Full HD1080p Converter Adapter With Remote Control

Multi Functional Audio/Video Switch Extractor with 8 Inputs to 1 HDMI Output Full HD1080p Converter Adapter With Remote Control
  • Продавецwww.flimmer.com
  • Список ценUS $69.59piece
  • Продажная ценаUS $69.59piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,5 (816)

Oписание продукта

The SDI to ALL Scaler Converter allows SD, HD and 3G-SDI signals to be shownon HDMI/DVI/VGA/Composite port display. This means that it is now easier for professionals todistribute and extend their SDI signal while giving the ability to displaywork on these display. Furthermore, thanks to L/R audio outputs users can output analog audio formats while the loop-through 3G-SDI design benefits users by lettingthem simultaneous show content on both SDI and HDMI/DVI/VGA/Composite port displays.

   


Features
Supports SD-SDI, HD-SDI and 3G-SDI input signals with auto-detection;
Supports HDMI/DVI/VGA/Composite and SDI (bypass) output simultaneously;
SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s,
1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s;
Supports SDI input/output distance up to 100 meters (3G-SDI), 200
meters (HD-SDI), or 300 meters (SD-SDI);
Scale any SDI signal to HDMI/DVI/VGA/Composite:
1. HDMI/DVI/VGA timings: 1280x720,1920x1080,1024x768,1920x1200;
2. Composite format: PAL,NTSC;
Supports SDI input modes:
1. SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)
2. HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s and1.485/1.001 Gbit/s)
3. 3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and
2.970/1.001 Gbit/s)
Supports Black screen signal output;
Equalized and re-clocked loop output;
Alternative audio output to analog 2CH;

Package Contents
SDI to ALL Scaler Converter         1pcs
12V/2.5A DC power adaptor       1pcs
Operation Manual               1pcs

Specification
SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates 2.970Gbps, 2.970/1.001Gbps,1.485Gbps,
1.485/1.001Gbps, and 270Mbps

Input Port

   1×BNC (SD/HD/3G-SDI)
Output Port 1×BNC (SD/HD/3G-SDI bypass),
   1×HDMI (Type A connector),
   1×DVI with Audio
   1x VGA with Audio
   1×Composite with R/L
ESD ProtectionHuman-body Model:
±8kV (air-gap discharge)
±4kV (contact discharge)
SDI Cable Distance 3G up to 100m (BELDEN 1694A Cable)
HD up to 200m (BELDEN 1694A Cable)
SD up to 300m (BELDEN 1694A Cable)
Dimensions 110mm (W)×288mm (D)×32mm (H)
Weight 750g
Chassis Materialmetal
Operating Temperature0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90% RH (Non-condensing)
Power Consumption 5W

Operation and Fuctions
Front panel
1. BLACK Button: Press this button willoutput Black screen signal to HDMI/DVI/VGA/Composite port display.
2. HDMI/DVI/VGA OUT button: Press these buttons to select the HDMI/DVI/VGA port resolution.
3. CVBS OUT button: Press these buttons to select the composite output port format.
Rear panel
1. SDI IN:Connect to the SDI output of the SDI source device.Accepts SD,HD or 3G SDI signals.
2. SDI LOOP OUT: Provides a \'loop-through\' SDI signal output for connectionto a SDI display.
3. OUTPUT: These slot is where you connect the HDMI/DVI/VGA/Compositeport display with cable for input source display.
4. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.
5. ON/OFF: Power ON/OFF.

Front panel

 

1.       BLACK Button: Press this button will output Black screen signal to HDMI/DVI/VGA/Composite port display.

2.       HDMI/DVI/VGA OUT button: Press these buttons to select the HDMI/DVI/VGA port resolution.

3.       CVBS OUT button:Press these buttons to select the composite output port format.

Rear panel

 

1.      SDI IN:Connect to the SDI output of the SDI source device.Accepts SD,HD or 3G SDI signals.

2.      SDI LOOP OUT: Provides a \'loop-through\' SDI signal output for connection to a SDI display.

3.     OUTPUT: These slot is where you connect the HDMI/DVI/VGA/Composite port display with cable for input source display.

4.     DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.

5.     ON/OFF: Power ON/OFF.