CNC 3 axis Laser engraving machine full kit, GRBL LASER CNC controller board 3 Axis Driver Board+3pcs nema17 motor+power supply

CNC 3 axis Laser engraving machine full kit, GRBL LASER CNC controller board 3 Axis Driver Board+3pcs nema17 motor+power supply
  • Продавецwww.flimmer.com
  • Список ценUS $63.59piece
  • Продажная ценаUS $63.59piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,4 (802)

Oписание продукта

    TB6600-T3 3 axis driver board, using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current, current stepless adjustable, 3 stepper motors can be driven at the same time, suitable for NEMA17, NEMA23 stepper motor, has a 12Vpower supply,can be used for MACH3 interface board or CNC controller; have large driver current, smooth running, quiet small volume, convenient installation, high cost performance, It is suitable for making CNC machines and other automation equipment.
    This USB motion control card has the below advantages: easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitablefor all versions of Windows. Support mach3mill various versions of software. Used for making engraving machine control system. 

aeProduct.getSubject()

  • 1 x TB6600-T3 3 Axis stepper motor driver board
  • 1 x  mach3 4 Axis USB CNC Controller card 100KHz
  • 3 x nema23 76mm length stepper motor
  • 1 x 36V/9.7A switching power supply
  • 1 x USB cable
  • English user manual will send by Email or CD

aeProduct.getSubject()

TB6600-T3 3 Axis driver board:

Characteristics:

1.DC Power input type:+14V~40V;

2.Output current:0~4.5A,current stepless adjustable;

3.12V Power output : Maximum output 2A current, for CNC controller or Mach3 interface board power supply;

4.Automatic half current function: when the motor stops running, the standby current is automatically reduced to half of the working current to reduce the heat of the driver;

5.Mircostep: 1、2、4、8、16;

6. Automatic decay function: the chip adjusts the current decay mode according to the motor parameters and running speed to reduce the noise of the driver.

7.Protect form : Overheated protection, over-current protection

8.The maximum pulse rate is 200KHZ.

9.Using the PWM chopper - type single - chip bipolar sinusoidal Micro - step current control mode

10. Dimensions: 166mm*88mm*34mm

11. Working environment: Temperature-15~50℃ Humidity<90%.

I/O Ports:

The text on PCB

Explain

V+  V-

Positive and negative pole of power supply

A+  A-

Stepping motor one winding

B+  B-:

Stepping motor other winding

+5V

Input signal +5V (COM)

XP

X  Axis pulse signal

XD

X  Axis direction signal

YP

Y  Axis pulse signal

YD

Y  Axis direction signal

ZP

Z  Axis pulse signal

ZD

Z  Axis direction signal

EN

All axis enable signal

GND

Power negative  for measuring reference voltage

VX

X  Axis reference voltage test point

VY

Y  Axis reference voltage test point

VZ

Z  Axis reference voltage test point

VA

A  Axis reference voltage test point

12V

12V power output positive pole, maximum output 2A current

V-

12V power output negative

POWER  

Power indicator  LED(red)

RUN

Motor running indicator LED(Green)

ALARM

Fault indication LED(red), Overheated、over-current.,the red LED is on

100KHz 4 Axis USB controller board:

Features:

 1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;

 2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;

 3. Support automatic probe tool

 4. Support Emergency input

 5. Support for limit switch

 6. Support for connecting electronic handwheel

 7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.

 8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.

 9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device

 10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;

 11. 1 status LED, indicate connection status on the board.

Typical Connection:

USB+TB6600-T3

 

Installation Dimensions:

T3_

P201803151455

aeProduct.getSubject()

stepper motor

 

Model

57HS76

Number of phases

2-phase

Number of lines

4-wire

Phase voltage

3.08V

Phase current

3A

Resistence

1.1Ω

Inductance

3.6mH

Torque

1.89N.M(270 Oz-in)

Shaft Diameter

8mm 

Axial length

21mm

Side length

57mm

High

76mm

Weight

1100g

 

aeProduct.getSubject()

 

RED:         A+

BLUE:        A-

GREEN:      B+

BLACK:      B-

 

Switching power supply

1. the range of AC input voltage is changed by the switch
2. high-efficiency, high reliability

3.100% full load burn-in test

4. Protections: Short circuit / overload / over voltage / over temperature

5. built-in cooling DC fan control

6. Working frequency is 25 kHz

7.Input Voltage:110V/220V

8. Output Voltage:36V

9. Output Current:9.7A

10.Output Power:350W

11. 1 year warranty

12.Size:215 * 115 * 50mm(L*W*H)

 

aeProduct.getSubject()

 

USB+TB6600-T3+M76X3

T3-1_T3-2_T3-4_

 

aeProduct.getSubject()

 

\'