CNC Router 3 Axis Kit,TB6600 3 Axis Stepper Motor Driver Controller kit 4.5A mach3 + one 5 axis breakout board

CNC Router 3 Axis Kit,TB6600 3 Axis Stepper Motor Driver Controller kit 4.5A mach3 + one 5 axis breakout board
  • Продавец
  • Список ценUS $32.93piece
  • Продажная ценаUS $32.93piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (455)

Oписание продукта


Package  Includes
1 x 24V/10A switching power supply
4 x 1 Axis TB6600  stepper motor driver
4x57HS5630A4  stepper motor (motor shaft is 6.35mm)
1 x 5 axis breakout board
1 x DB25 parallel cable
1 x USB cable
English user manual will send by  Email
  • Detailed information :

1. Nema 23 stepper motor:


Step angel   (°)    Motor      Length    L(mm)   Rate Current (A)
Resistance (Ω)

Phase Inductance (mH)
Holding Torque (n.m)Lead Wire (NO.)Rotor Inertia (g.?)   Motor Weight (kg)
57HS5630A41.856   3 0.8 2.41.24280   0.68




5 2_

5 axis breakout board
1,fully support of MACH3 and other computer software support for parallel port control.
2,USB power supply and peripherals powered phase separation to protect computer security.
3,peripheral wide voltage input,12-24V, and anti-reverse function.
4,all of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
5,all the way to the relay output port, control spindle switch. Output port P17 mouth.
6,all the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
7,open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
8,P1 as PWM outputs can be controlled with optocoupler input spindle governor.
9,can be accessed by a common cathode or common anode input level to 5V drive.
10, Output pins with the expansion interface can 2.54mm pin 2.54mmXH-Block;
TB6600 1 Axis stepper driver
1.DC power input type:12V~40V(Typical 24V);
2.Output current:0.6~4.0A;
3.Mircostep: 1,2,4,8,16;
4.Protect form : Overheated protection,over-current protection,under voltage protection;
5.The maximum pulse rate is 200KHZ;
7.Net Weight:253g;                                      
8.Working environment:Temperature-15~50 degree, Humidity<90%.