AR9331 Yun Shield Expansion Board with PCB Antenna for Arduino Leonardo Duemilanove Diecimila Mega2560

AR9331 Yun Shield Expansion Board with PCB Antenna for Arduino Leonardo Duemilanove Diecimila Mega2560
  • Продавецwww.flimmer.com
  • Список ценUS $30.00piece
  • Продажная ценаUS $30.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,1 (770)

Oписание продукта

3.2" TFT LCD Touch + 3.2 Inch Shield Mega Shield + For Mega2560 R3 with Usb Cable For Arduino

 

3.2\'\' TFT LCD Display:
3.2" TFT LCD Display is a LCD touch screen module. It is a powerful and multifunctional module for your project. The Screen include a controller SSD1289, it\'s a support 8/16bit data interface, easy to drive by many MCU like STM32, AVR and 8051. It is designed with a touch controller in it. The touch IC is XPT2046, and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.
This TFT LCD Screen Module, 40pins interface, not just a LCD screen but include the Touch, SD card and Flash design. So it’s a powerful extension module for your project.
The LCD has a wide viewing angle; the contrast is also very suitable.
TFT screen with SD card reader.
65K true to life colors.
240 x 320 QVGA resolutions.
Size: 3.2 inch
 
Attention please: SD card supports Mega 2560, ARM and 51 MCU.  (SD Memory Supports: <=2GB. Please use the Arduino Software version: 0023/0022)
 
TFT LCD Mega Shield V2.2:
Because TFT01 LCD is working at 3.3V voltage, it cannot be used directly on top of a for standard Arduino board, so in order to make TFT01 LCD compatible for using on standard Arduino board, designed section TFT Shield, can be directly plugged into the Arduino board that use TFT01 LCD module
TFT01 LCD 16 can support the current mode, since there is sufficient Mega2560 IO, while using only a touch screen interface or SD card interface, like in the case of face 328S will not exist.
 
Note: V2.2 is an upgrade version, including V2.0 functionality.
 
Mega2560 Board:
The Mega 2560 is a microcontroller board based on the ATmega2560 .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
 
Microcontroller:ATmega2560
Operating Voltage :5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins :54 (of which 14 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin :40 mA
DC Current for 3.3V Pin :50 mA
Flash Memory:256 KB of which 4 KB used by bootloader
SRAM: 8 KB
EEPROM :4 KB
 
Package includes:
 
1 x 3.2\'\' TFT LCD Display + TFT LCD Mega Shield + Mega2560 Board
3.2 TFT LCD_ 1

We accept Credit Card, Western Union, TT. the best way is direct online payment,You can choose a method which is the most convenient for you.If you want other payment terms please let us konw before when you order.
•Payment must be made within 7 days of order. If you can\'t check out immediately after auction close, please wait for a few minutes and retry. 
•Make sure that you have completed all the detailed information like contact person,address,post code and telephone number when filling in your buyer\'s information.
•To protect your interests, your payment will be temporarily held by Aliexpress, and will not be released until you receive your order and are satisfied with it. 

•  Items are shipped from China using Airmail, reach most of the countries within 10 to 20 business days. 
• Delivery time depends on destination and other factors. 
• If you purchase more items and need some discount of the shipping fee, please send the message to us, and we’ll respond you in 1 business day. 
• Accept DROP SHIPPING. Please confirm the address. We only ship to cinfired order address, and your order address mus MATCH your shipping address. 

• We highly value long term business relations. Buy with confidence!

• If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.

• If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.

• If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.

•We depend on our customer satisfaction to succeed.
•If you are not satisfied with purchase please contact us within 24hours, your feedback is extremely important to us.we\'ll stay with you until problem solved and offer best services as we can.
•If you are satisfied with our items, please leave a positive feedback to us. We will leave a positive feedback to you later. 

•We depend on our customer satisfaction to succeed.
•If you are not satisfied with purchase please contact us within 24hours, your feedback is extremely important to us.we\'ll stay with you until problem solved and offer best services as we can.
•If you are satisfied with our items, please leave a positive feedback to us. We will leave a positive feedback to you later.