DDCSV1.1 Engraving Machine CNC 3 Axis Controller, 500KHz 24V CNC system step servo offline controller

DDCSV1.1 Engraving Machine CNC 3 Axis Controller, 500KHz 24V CNC system step servo offline controller
  • Продавецwww.flimmer.com
  • Список ценUS $159.60piece
  • Продажная ценаUS $159.60piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,1 (646)

Oписание продукта

2

This 5 axis breakout board has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitable for all versions of Windows. Fully supporting all Mach3 versions.

1-1

Main Feature
  • mach3 5Axis breakout board

    1.full support for MACH3, KCAM4, EMC2, and support parallel port to control the host computer software;
    2.5 output signal ,can connect 5 stepper motor driver ;
    3.5 input port, Can connect to the limit switch, emergency stop, or other Input devices ,5 input signal indication LED;
    4.One relay, it can be used to control spindle start and stop,1 signal indication LED beside relay;
    5.power supply have 2 choice, USB power form computer or an external 5V power supply;
    6.pulse and direction signal shaping,enhanced, data transfer speeds reach 10 MBit / S;
    7.have 2 kinds connector ,the 4PIN XH connector can connect driver convenient and efficient.
 
  • TB6560 Driver description:

    1.the use of new imported Japanese Toshiba TB6560 chip;
    2.The base used dense teeth radiator, cooling super, to ensure the stable operation of equipment;
    3.the input signal using a high-speed opto-isolation to ensure not losing steps, which the pulse direction signals with the same level of 6N137, dual high-speed optocoupler;

    4.a variety of semi-flow mode and the semi-flow current selection, the use of more flexible
    5.Decay mode is adjustable to ensure the motor running smooth;
    6.Compact Dimensions, cooling pad size: 75mm * 65mm, four mechanical installation positioning hole size is: 67mm * 58, mounting hole diameter is 4mm
    7.Set method detailed table on the board, easy to use;
    8.With anti-reverse circuit, even if not careful the power plug back and will not burn the chip, it\'s very safe to use.

  •  

    Stepper Motor(57HS21-A,made by leisai/leadshine)

  • 1-4QQ20170802095654

  •                QQ20170802095711QQ20170802095706

  • Switching power supply

 
1. the range of AC input voltage is changed by the switch
2. high-efficiency, high reliability
3.100% full load burn-in test
4. Protections: Short circuit / overload / over voltage / over temperature
5. built-in cooling DC fan control
6. Working frequency is 25 kHz
7.Input Voltage:110V/220V
8. Output Voltage:24V
9. Output Current:10A
10.Output Power:250W
11. 1 year warranty
12.Size:215 * 115 * 50mm(L*W*H)

1


  • 1 x 24V/10A switching power supply
  • 4 x single Axis TB6560  stepper motor driver
  • 4 x Leadshine 57 2 phase Stepper Motor
  • 1 x 5 axis breakout board
  • 1 x DB25 parallel cable
  • 1 x USB cable
  • 4 x signal cables
English user manual will send by a CD or Email

  

3

if  you have any problems of payment please contact us!
if you need to buy more goods but the price isnotvery cheap please contact us!
 

4

All products have been checked and packaged in good condition before dispatch.
ALL peoducts have 1yeas warranty.
If you are not satisfied with our product and service.Please contact us first  before giving a non positive feedback or dispute.we will try to our best solve the problems.